Selecting INPUT SIGNAL
INPUT SIGNAL
• Used to select
INPUT signal of
external device
connected to the
PDP.
INPUT
POWER
SELECT
DISPLAY
ZOOM-
ZOOM+
MENU
VOL
VOL
PICTURE
SCREEN
MODE
MODE
FREEZE
SOUND
MUTE
SLEEP
MODE
44
1
Press the INPUT SELECT button.
• Press the [INPUT SELECT] button on the Remote Control or
INPUT
PDP Display to select [COMPONENT 1] or [COMPONENT 2].
SELECT
• Each time you press the [input select] button, a different screen
mode appears. The sequences used are as follows:
COMPONENT 1 --> COMPONENT 2 --> VIDEO 1 --> VIDEO 2
-->COMPUTER
NOTES:
* If external device is not connected or INPUT signal is not
applied, Warning Message ("No Signal") would be displayed.
* If this is the case, check if external device is connected or
terminal connection is properly done.
Component1
Component2
PC
Video1
Video2