Selecting Input Signal - Daewoo DPP-42A2GMBD User Manual

Selecting INPUT SIGNAL

INPUT SIGNAL
• Used to select
INPUT signal of
external device
connected to the
PDP.
58
1
Press the Input Signal Selecting Button.
• Press the "TV", "AV" or "MULTIMEDIA" button on the
remote control or the PDP Display to select the desired
input signal.
• Each time you press input mode buttons, a different input mode
appears. The sequence used is as follows:
• "
TV " button
• "
AV " button
• "
MULTIMEDIA" button
Component
NOTES:
1) If an external device is not connected or INPUT signal is not
applied a Warning Message ("No Signal") will be displayed.
2) In this case, check if external device is connected and/or
terminal connection is properly fitted.
3) Also, you can select input using [INPUT SELECT] button in
the keypad of the PDP unit. The sequence of selection is as
follows:
TV -> AV1 -> AV2 -> AV3 -> Component ->
PC -> HDMI -> TV
TV
AV1 AV2
PC HDMI
Component
AV(S)3