Table of Contents
Advertisement
3
Input Select
INPUT
SELECT
4
NOTES:
1) Y/Cb/Cr, which stands for DVD Player's Output Terminal, can
also be written as Y/B-Y/R-Y, Y/Pb/Pr depending on the kinds
of DVD devices.
2) The way of connecting the DVD to the PDP is as follows:
Y <---> Y Cb <---> Pb, B-Y, Cr <---> Pr, R-Y
3) The DVD output can be made by Video, S-Video and/or
Component Video depending on the DVD devices. There are
various output modes, so be sure to check when to purchase it.
4) When connecting S-Video and Video simultaneously, only S-
Video will be displayed on the screen.
• Select [Component 1 or Component 2,
Video1, Video2] by pressing the INPUT
SELECT button of the Remote Control or
the PDP unit.
• Each time you press the INPUT SELECT
button, a different input mode appears. The
sequence is as follows: Component 1 -->
Component 2 --> Video 1 --> Video 2 --> PC
.
--> DVI
Component1
DVI
Select a Desired Title and Function
• Select a desired title and function by
using the Remote Control of the DVD.
Component2
Video1
PC
Video2
23
Advertisement
Table of Contents
