Canon C75, C80, C70 User Manual page 75

9
Use the numeric buttons to enter the fax/
telephone number you want to register (max.
120 digits, including spaces and pauses).
• To enter a space, press Space. Spaces are
optional and are ignored during dialling.
• To enter a pause, press R (Redial)/Pause.
• To correct a mistake in the number, press l to
delete the rightmost digit.
• To delete an entire entry or to change a previous
entry, press Clear.
• If you have already registered a number and you
only want to change the name, ignore this step.
• To cancel coded speed dialling for the code you
selected, press Clear then Set. Press Stop to
return to standby mode. The fax/telephone number
and the name registered under that code will be
deleted.
10
Press Set twice.
11
Use the numeric buttons to enter the name
that goes with the number (max. 16
characters, including spaces).
• If you are unsure how to enter characters,
p. 3-3.
• If you have already registered a name and want to
keep the same name, ignore this step.
12
Press Set.
13
To continue registering other coded speed
dialling codes, repeat the procedure from step
7.
-or-
Press Stop to return to standby mode.
n You can print the CODED SPEED DIAL LIST showing all the numbers and names registered for
coded speed dialling (
Chapter 6
p. 6-13). Keep this list near your unit so you can refer to it when dialling.
Ex:
Ex:
Ex:
Ex:
A
Ex:
Speed Dialling 6-7