Receiving Faxes Manually: MANUAL MODE
In
, if you connect the optional handset, a telephone, or an extension phone to
your unit, you can receive voice calls as well as manually activate reception of faxes. You can
activate reception from your unit or from the telephone or extension phone connected to the
unit (this is called Remote receiving ).
n
• For this mode, you need to connect the optional handset, a telephone, or an extension phone to
your unit. (
• Make sure the
enable this setting from the MultiPASS Suite. (
Setting MANUAL MODE
Follow this procedure to set the receive mode to
1
Press Receive Mode to select
.
• After a few seconds, the LCD changes to this
display:
Receiving a Fax Manually
Follow this procedure to receive a fax manually:
1
Make sure
(
above)
2
Make sure you have connected the optional
handset, a telephone, or an extension phone
to the unit. (
p. 2-6)
3
When you hear the optional handset,
telephone, or extension phone ring, pick up
the handset.
8-8
Receiving Faxes
p. 2-6)
setting is enabled (
is displayed in the LCD.
p. 14-7). For MultiPASS models, you can also
Software User's Guide )
:
Ex:
Ex:
Chapter 8