Using Group Dialling - Canon C75, C80, C70 User Manual

Using Group Dialling

To use this feature, you must first register a group of fax numbers for one-touch or coded
speed dialling. ( p. 6-9)
Follow this procedure to send a document to a group of destinations registered under a one-
touch speed dialling button or coded speed dialling code:
1
Open the document tray (MultiPASS models
only).
2
Adjust the document feed lever for the
document you are loading. (
3
Prepare the document and load it, face down,
in the ADF. ( p. 4-4)
• For colour sending, press Colour/B&W (Color/
B&W) to turn on its light. (
• To adjust the resolution and contrast,
7-5.
4
Enter the group registered under a one-touch
speed dialling button or coded speed dialling
code.
To enter a group registered under a one-
touch speed dialling button:
Press the one-touch speed dialling button
assigned to the group you wish to fax.
• If you press the wrong button, press Stop, then
press the correct button.
To enter a group registered under a coded
speed dialling code:
Press Coded Dial, then use the numeric
buttons to enter the two-digit code assigned
to the group you wish to fax.
• If you enter the wrong code, press Stop. Then
press Coded Dial and enter the correct code.
5
Press Start (Start/Scan) to begin scanning
for sending, or wait a few seconds for the unit
to begin scanning automatically.
• If you prefer the unit never to scan a document
automatically after a few seconds, disable the
setting. (
6-12 Speed Dialling
p. 4-2)
p. 7-3)
pp. 7-4,
p. 14-6)
Ex:
(Currently used memory)
(Standby to scan)
Ex:
A
Chapter 6