Table of Contents
Advertisement
5
Remove the BJ cartridge from its package,
then remove the orange protective cap q and
tape w.
• Discard the cap and tape. Never attempt to
reattach them to the BJ cartridge print head.
• Install the BJ cartridge immediately after removing
the cap and tape.
• Spilled ink can stain any surface; protect yourself
and your work area.
6
With the label facing outwards, insert the BJ
cartridge into the cartridge holder. Lower the
blue cartridge lock lever until it locks into
position.
7
Press C.
• The cartridge holder moves to its home position
on the right side of the unit and begins cleaning
the BJ cartridge print head. This process takes
about 55 seconds.
c
Do not try to manually move or stop the
cartridge holder since this may damage
the unit.
8
Close the printer cover.
9
Close the document tray (MultiPASS models
only).
If you need to unplug the unit, wait until it is in standby mode (time and receive mode displayed in
n
the LCD). Otherwise the cartridge holder may not be in its home position causing the BJ cartridge
to remain uncapped and dry out.
2-16
Setting Up
1
Do not touch these
2
precision components.
C
B
a
I n
r t
k
C
r i
B
l -
d
g
l a
2
e
c
M
1
k
a
J
d
a
e
p
a
i n
n
Chapter 2
Hide quick links:
Advertisement
Table of Contents
