Equipment Care - UMF Medical 4010-650 Owner's Manual

Power procedure chair
Hide thumbs Also See for 4010-650:
Table of Contents

Advertisement

EQUIPMENT CARE

Care of upholstery
The upholstery material used on the top, leg rest, and headrest is
resistant to most medical stains.
For light cleaning:
A solution of 10% liquid soap and clean water applied with
1
a soft damp cloth will remove disinfection cleaner build-up.
If necessary, a solution of liquid cleanser and water can be
2
applied with a soft bristle brush. Wipe away residue with a
water-dampened cloth.
For disinfection:
Dampen a soft white cloth with a solution of standard
1
bleach (sodium hypochlorite) or other chlorine-based
cleaner*** and water; 10% bleach, 90% water.
Rub gently.
2
If necessary, allow the 1:10 diluted bleach (sodium
3
hypochlorite) solution to puddle on the affected area or
apply with a clean, soaked cloth for approximately 30
minutes. Rinse with a water-dampened cloth to remove any
remaining bleach concentration.
Rinse with a water-dampened cloth to remove cleaner
4
solution and allow thorough drying of material.
***See current CDC Guidline for Disinfection & Sterilization in
Healthcare Facilities for bleach alternative cleaners.
Note: Immediately remove any fluid spilled on upholstery
surface.
Antimicrobial: UMF Medical Upholstery providers outstanding
protection in difficult medical and healthcare environments
and contains an agent effective against bacterial and fungal
microorganisms.
QUESTIONS, COMMENTS OR SERVICE REQUESTS
Contact:
UMF Medical Customer Service
1316 Eisenhower Blvd
Johnstown, PA 15904
* For service requests, please have model & serial number available.
Toll Free: 1(800) 638-5322
Email: customerservice@umfmedical.com
Fax: 1(814) 266-1870
Care of painted surfaces
A chemical acid-resistant paint is used, but extreme care
must be taken not to use ammonia-based cleaners or
discoloration of paint may occur. A damp cloth or mild
liquid soap solution should be sufficient.
Care of bright metal surfaces
All non-painted surfaces, chrome plated, or stainless steel
should be wiped weekly with a clean damp cloth then
buffed to a lustrous shine with a soft dry cloth.
Care of base
The protective base is easily washable with mild liquid soap
and water. A soft bristle brush may be used on scuffed or
stained areas.
CAUTION:
WHEN THE USE OF STRONG
CLEANING SOLUTIONS IS NECESSARY,
TEST AN INCONSPICUOUS AREA
TO ASSURE THAT DAMAGE TO
UPHOLSTERY OR PAINTED SURFACES
WILL NOT OCCUR.
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4011-6505016-650

Table of Contents