Installation; Delivery Packaging; Disposal Of Packaging - RAIS Attika Q-TEE Series User Manual

INSTALLATION

The following section explains how to install the wood-burning stove
and includes information about the packaging, installation distances,
etc.

DELIVERY PACKAGING

The wood-burning stove is supplied secured to a transport pallet
using four transport safety fittings – one in each corner (A).
The safety fittings are secured using screws and these must be
removed. The safety fittings can then be removed (B).
A
The top of the wood-burning stove has two polystyrene blocks (1),
which are there to protect the combustion chamber lining during
transport. These must be removed before starting a fire in the stove.
A ( 0,5 )

DISPOSAL OF PACKAGING

RECYCLING
The wood-burning stove is delivered in packaging that can be
recycled.
This packaging must be disposed of in accordance with national
regulations relating to the disposal of waste.
INSTALLATION
A A
A ( 0,5 ) A ( 0,5 )
B
B ( 0,5 )
1
The glass cannot be recycled.
The glass must be disposed of along with any ceramics or por-
celain waste. Heat-resistant glass has a higher melting point
and therefore cannot be recycled.
By ensuring heat-resistant glass does not end up alongside
recyclable products you are making an important contribution
to the environment.
B B
B ( 0,5 ) B ( 0,5 )
1