Troubleshooting - Ikelite DS160 Manual

2. Lightly lubricate the threads of the bulkhead. Be careful not to get
lubricant inside the gold connectors or rubber grommet inside of the
bulkhead.
3. Attach the waterproof bulkhead cap to the bulkhead.
4. Rinse the strobe with fresh water and dry thoroughly.
5. Remove the battery pack and charge according to its instructions.
6. Attach the battery pack cover to the battery pack.
7. Store the strobe front and battery pack in a cool, dry place.
8. Like regulators and other pressure-sensitive equipment, we
recommend careful care and cleaning along with bi-annual
replacement of the factory seals.

Troubleshooting

Water enters the battery pack.
•
Remove battery pack, clean and dry the strobe front.
•
Dispose of the battery pack at an approved local facility.
•
Replace the battery with a new battery pack.
•
Never re-use a battery pack that has been exposed to water.
Photos are over-exposed (too light).
•
Adjust strobe exposure setting.
•
Adjust aperture (smaller), shutter speed (faster), or ISO (higher)
setting.
•
Move strobe(s) further away from your subject.
•
Adjust exposure compensation in the camera.
Photos are under-exposed (too dark).
•
Adjust strobe exposure setting.
16