WIKA air2guide A2G-85 Operating Instructions Manual page 14

5. Commissioning, operation
Insert the probe to the desired depth. The end of the probe must
■
reach the middle of the duct.
Mount the probe into the flange
EN
Fasten the screws tightly to the flange in order that the probe is held in
■
position.
Air flow direction
Air flow direction
Strain relief directed downwards
Strain relief facing down
Air flow direction
Air flow direction
14
Tighten the
Tighten the
screws
screw
Air flow direction
Air flow direction
Air flow direction
Air flow direction
WIKA operating instructions model A2G-85
Air flow direction
Air flow direction