fantastic furniture Hamilton Hall Table Quick Start Manual page 7

Step 5
You will need
4 x Cam Bolts Phillips Head
(H7) Screwdriver
Attach 4 x Cam Bolts (H7) to Top Panel (P1) by tightening with the Phillips Head
Screwdriver.
Step 6
You will need
6 x Long 4 x Cam Nuts
Screws (H4) (H8)
1 x Safety Strap Phillips Head
(H5) Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Cam Nuts (H8) into Side Panels
(P2x2) as shown. Rotate the cam nuts so
the arrow points towards the incoming cam
bolts. Attach 1 x Safety Strap (H5) between Top Panel (P1) and Rail (P4) as shown. Attach
Rails (P4x2) and Side Panels (P2x2) to Top Panel (P1) with 6 x Long Screws (H4) by tightening
with the Phillips Head Screwdriver.
fantasticfurniture.com.au fantasticfurniture.com.au
(P4)
(P2)
(P1)
(P1)
(P4)
(P2)
Page 7