General Hazards; Electrical Hazards - Generac Power Systems PWRcell X7602 Owner's Manual

Hide thumbs Also See for PWRcell X7602:
Table of Contents

Advertisement

Introduction and Safety

General Hazards

DANGER
Electrocution. Do not wear jewelry while
working on this equipment. Doing so will
result in death or serious injury.
DANGER
Automatic start-up. Disconnect utility power and
render unit inoperable before working on unit.
Failure to do so will result in death or serious injury.
WARNING
Risk of injury. Do not operate or service this machine
if not fully alert. Fatigue can impair the ability to
operate or service this equipment and could result in
death or serious injury.
WARNING
Loss of life. This product is not intended to
be used in a critical life support application.
Failure to adhere to this warning could result
in death or serious injury.
WARNING
Equipment damage. Only qualified service personnel may
install, operate, and maintain this equipment. Failure to
follow proper installation requirements could result in death,
serious injury, and equipment or property damage.
WARNING
Electric shock. Only a trained and licensed electrician
should perform wiring and connections to unit. Failure to
follow proper installation requirements could result in death,
serious injury, and equipment or property damage.
WARNING
Electrocution. Potentially lethal voltages are generated
by this equipment. Render the equipment safe before
attempting repairs or maintenance. Failure to do so
could result in death or serious injury.
CAUTION
Equipment damage. Connect only to REbus-compatible
devices to the DC bus. Never connect to any other DC
power source. Connecting to other DC power sources
could result in equipment damage.
2
Connecting the PWRcell system to the electric util-
ity grid must only be done after receiving prior
approval from the utility company.
Only competent, qualified personnel should install,
operate, and service this equipment. Strictly com-
ply to local, state, and national electrical and build-
ing codes. When using this equipment, comply with
(000188)
regulations established by the National Electrical
Code (NEC), CSA Standard; the Occupational
Safety and Health Administration (OSHA), or the
local agency for workplace health and safety.
Protection against lightning surges in accordance with
local electric codes is the responsibility of the installer.
NOTE: Lightning damage is not covered by warranty.
(000191)
Never work on this equipment while physically or
mentally fatigued.
Any voltage measurements should be performed
with a meter that meets UL3111 safety standards,
and meets or exceeds overvoltage class CAT III.
(000215a)

Electrical Hazards

(000209b)
Electrocution. PWRcell Battery front cover should
be removed by a qualified technician only.
Removing the front cover could result in death,
serious injury, equipment or property damage.
(000182a)
Electrocution. In the event of electrical accident,
immediately shut power OFF. Use non-conductive
implements to free victim from live conductor. Apply
first aid and get medical help. Failure to do so will
(000155a)
result in death or serious injury.
Electrocution. Turn battery disconnect OFF and
de-energize REbus before touching terminals.
Failure to do so will result in death, serious injury,
equipment and property damage.
(000187)
Electrocution. Verify electrical system is
properly grounded before applying power.
Failure to do so will result in death or serious
(000598a)
injury.
DANGER
Electrocution. Water contact with a power
source, if not avoided, will result in death
or serious injury.
DANGER
DANGER
DANGER
DANGER
Owner's Manual for Generac PWRCell Inverter
(000104)
(000604)
(000145)
(000599)
(000152)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pwrcell x11402Pwrcell apke00014

Table of Contents