Pre-Flight Checks - Next Level Racing FLIGHT SIMULATOR LITE Instruction Manual

support@nextlevelracing.com
PRE-FLIGHT
CHECKS
WARNING
• Please do not use power tools for assembly as over tightening can damage your frame.
• Do not adjust the hubs while user is sitting in cockpit. Make sure user is out of the cockpit before adjusting.
• Make sure the hubs are tightened fully before using the cockpit. (spin the hub clockwise to ensure it is fully tight)
• Make sure strap on wheel bar is tight when adjusting the hubs otherwise the wheel will fall when hubs are open.
If you require any support with
your product please contact our friendly team at:
support@nextlevelracing.com
WARNING
CHOKING HAZARD - Small parts not for children under 3 years
or any individuals who have a tendency to place inedible objects
in their mouths.
ASSEMBLY
VIDEO
bit.ly/nlrbuild
4
IN THE
BOX
2 X FLIGHT PLATES 2 X KEYBOARD BRACKET 1 X SUPPORT ARM
1 X LARGE MOUSE PLATE
14 X M4 15MM
2 X M6 COUNTERSUNK
1 X M6 SQUARE NECK BOLT 12 X M6 X 60MM
14 X M6 WASHERS 10 X M4 NUTS
12 X 10MM NYLON
1 X M5 WINGNUT 1 X M6 WINGNUT
1 x M6 ALLEN KEY
1 X WRENCH
PHILLIPS HEAD
Video Instruction: bit.ly/nlrbuild
2 X ADJUSTER PLATE 1 X TPR ADAPTER
1 X M5 60MM 4 X M5 30MM
14 X M6 15MM
14 X M4 WASHERS 4 X M5 WASHER
16 X M6 30MM FULLY
28 X M6 FLANGE NUTS THREADED STUD
4 X M5 NUTS
1 x M4 ALLEN KEY 1 x M3 ALLEN KEY
SPACERS
5