Avue G1085PIRW Quick Start Manual

G1085PIRW
1. Use the Appropriate Power Supply
The input for G1085PIRW is DC 12V Be sure to connect it to the
wrong connection may cause maifunction and/or damage to the video camera
2.Do not attempt to disassembIe the camera
To prevent electric shock,do not remove screws or covers.There are on user serviceable
parts inside.Ask a qualified service person for servicing.
Handle the camera with care
3.
Do not abuse the camera. Avoid striking, shaking
damaged by improper handling or storage.
to rain or moisture,or try to operate It in wet areas .
4. Do not expose the camera
1 Locations where temperature is lower than -20 C or higher than 55 C
Locations where humidity is higher than 90%;
2
Locations where there are Iarge amounts of water vapor and steam.
3
1. 1/2.9" CMOS
2. CVBS 1280H output ,support AHD/THD/CHD 1080P output meanwhile
3 . High resolution, 1080P, true color recovering
4 . Self-adaptive 2D/3D image denoising
5. simple operation
6.OSD menu

PRECAUTIONS

appropriate power
.
... .
etc. The camera could be
。
。
Thank you for your purchasing this product. Before attempting to
connect or operate this product, please read these instructions carefully and
save this manual for future use.
G1085PIRW uses advanced imaging technology with resolution as high as
1080P, CVBS 1280H output ,support AHD/THD/CHD 1080P output meanwhile
s elf-adaptive 2D/3D noise reduction.
G1085PIRW comes with a powerful OSD menu that include motion detection,
digital zoom, privacy zones, lens shading compensation, DPC Auto electronic
shutter, AWB, image sharpening, etc
5. Clean the CMOS faceplate with care.
When cleaning the CMOS panel, do not use strong or abrasive
.
detergents,use a piece of lens tissue or cotton tipped applicator and
ethanol.
6. Do not attempt to aim the camera at the sun.
Do not attempt to aim the camera at the sun or other extremely bright
objects, hat cause smear to appear irrespective of whether the camera
is operating or not.This can damage the CMOS (Complementary Metal
Oxide Semiconductor).
7. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless
communication device that emits strong electromagnetic field, some
irregularity such as noise on monitor screen may happen.
,
.
,