Samsung MXJ-YA1509 Series Installation Manual page 83

③ ③ 'L' 'L' Fitting Fitting connection
All of the fitting connecting parts All of the fitting connecting
should be insulated. should be insulated.
Bring face to face the each end Bring face to face the each end
of EPDM on fitting connection of EPDM on fitting connection
part. part.
① ① Insertion type: general insulation method Insertion type: general insulation method
② ② Partitioning: Vertical insertion type Partitioning: Vertical insertion type
③ ③ Elbow & edge area insulation methods Elbow & edge area i
connection part part insulation insulation
parts
Make fitting cover to fit the Make fitting cover to fit the
EPDM insulation. Fitting cover EPDM insulation. Fitting cover
should be overlapped with should be overlapped with
insulation min 1inch(2.5m). insulation min 1inch(2.5m).
nsulation methods
82 82
Bond the both cutting sides of Bond the both cutting sides of
fitting cover. fitting cover.
Installation guide Installation guide