Samsung MXJ-YA1509 Series Installation Manual page 30

2. 2.
Preparation for installation Preparation for installation
Problem analysis Problem analysis
A chassis of outdoor unit is bent and a heat exchanger of A chassis of outdoor unit is bent and a heat exchanger of
 
the condenser is damaged due to inappropriate the condenser is damaged due
transportation method. transportation method.
Consequence Consequence
When moving the product, you must lift up and down the When moving the product, you must lift up and down the
 
product gently. When the product is sc product gently. When the product is scratched, product
will corrode or get rust. will corrode or get rust. If the heat exchanger of the
condenser gets damaged, it will cause deteriorating condenser gets damaged, it will cause deteriorating
performance and even make a leakage from the pipe.
performance and even make a leakage from the pipe.
Standard procedure Standard procedure
Since the product is valuable, you must take extra care Since the product is valuable, you must take extra care
 
when moving it. You must protect the product from when moving it. You must protect the product from
exterior or structure damage.
exterior or structure damage.
Proper method Proper method
When moving with crane : When moving with crane :
 
1) To prevent the surface damage or scratch while 1) To prevent the surface damage or scratch while
moving the product, put 1.5mm thick cloth or other moving the product, put 1.5mm thick cloth or other
soft material between the product and rope. soft material between the product and rope.
2) Use 4 wire ropes 2) Use 4 wire ropes
From the figure on the left, A > 1.5m From the figure on the left, A
30 30
to inappropriate
ratched, product
If the heat exchanger of the
> 1.5m