4-6. Installing the Branch Pipe for the Outdoor Unit
4-6. Installing the Branch Pipe for the Outdoor Unit
1) 1)
Connecting the outdoor unit pipe
Connecting the outdoor unit pipe
Heat Pump
Heat Pump
Working
Working
process
process
Single
Single
Installation
Installation
Combination
Combination
installation
installation
Connection from front side
Connection from front side
First, remove the cover from unit.
First, remove the cover from unit.
•
•
Separate the knock-out hole to use. If
Separate the knock-out hole to use. If
•
•
the hole is open, small animals such
the hole is open, small animals such
as squirrels and rats may get into the
as squirrels and rats may get into the
unit through the hole and the unit may
unit through the hole and the unit may
be damaged.
be damaged.
Fix the pipe cover of bottom side and
Fix the pipe cover of bottom side and
•
•
fix the pipe cover of upper side
fix the pipe cover of upper side
thereafter.
thereafter.
64
64
Connection from bottom at the
Connection from bottom at the
left/right side Working process
left/right side Working process
Separate the knock-out hole at the
Separate the knock-out hole at the
•
•
bottom side of the unit and install the
bottom side of the unit and install the
pipe.
pipe.
After installing and insulating the pipe,
After installing and insulating the pipe,
•
•
close up the remaining gap. If the gap
close up the remaining gap. If the gap
is remain open, small animals such as
is remain open, small animals such as
rats and squirrels may get inside the
rats and squirrels may get inside the
unit and cause damage to the unit.
unit and cause damage to the
Installation guide
Installation guide
unit.