5. 5.
Outdoor Units installation
Outdoor Units installation
6) Power Cable Arrangement
6) Power Cable Arrangement
(1) Make sure all wiring should not contact with piping line during the field wiring work. If not, the
(1) Make sure all wiring should not contact with piping line during the field wiring work. If not, the
vibration of compressor and high temperature pipe c
vibration of compressor and high temperature pipe can make damage to wiring
7) Circuit Breake
7) Circuit
Breaker I r Installation
(1) Install a circuit breaker. For safety and maintenance, we strongly recommend that MCCB and ELB
(1) Install a circuit breaker. For safety and maintenance, we strongly recommend that MCCB and ELB
and(or ELCB alone) have to be installed every outdoor unit.
and(or ELCB alone) have to be install
(2) Every system must be installed individual MCCB and ELB and the specification must meet the
(2) Every system must be installed individual MCCB and ELB and the specification must meet the
requirements.
requirements.
Good
Good
nstallation
ed every outdoor unit.
Good
Good
131
131
an make damage to wiring
Bad
Bad
Bad
Bad