Samsung MXJ-YA1509 Series Installation Manual page 80

3. 3.
Guideline for each installation process Guideline for each installation process
6-5. Drainpipe Combination and Bonding 6-5. Drainpipe Combination and Bonding
1) Apply PVC glue to the joint area and wait for one to two minutes before combining them. 1) Apply PVC glue to the joint area and wait for one to two minutes before combining them.
6-6. Drainpipe Water Soaking Test 6-6. Drainpipe Water Soaking Test
1) Pour the water through the uppermost drainpipe or an air vent to check if the water 1) Pour the water through the uppermost drainpipe or an air vent to check if the water
flows smoothly. After that, for twenty-four hours, perform water soaking test to test flows smoothly. After that, for twenty-four hours, perform water soaking test to test
leakages. In this test, the amount of water injection should be same as the amount of leakages. In this test, the amount of water injection should be same as the amount of
water discharge. water discharge.
2) In the winter, use anti-freezing liquid instead of water. 2) In the winter, use anti-freezing liquid instead of water.
3) If the water discharge is not smooth, recheck the tilt of the drainpipe. 3) If the water discharge is not smooth, recheck the
79 79
Drain water soaking test Drain water soaking test
Check for leakages after 24 hours Check for leakages after 24
Check for leakages after 24 hours. Check for leakages after 24
tilt of the drainpipe.
hours
hours.