Samsung MXJ-YA1509 Series Installation Manual page 103

(5) Connect the float switch of the drain pump(Yellow) and power supply unit(Black) to the (5) Connect the float switch of the drai
of the indoor unit. of the indoor unit.
(6) Adjust K4 DIP switch(SW03) to the "OFF" position. (6) Adjust K4 DIP switch(SW03) to the "OFF" position.
(7) Check water leakage of the drain hose port and the drainpipe (7) Check water leakage of the d
2) Slim Duct (AVXDSH 2) Slim Duct (AVXDSH** 01)_
Release the two screws on the control box and separate the cover and the cabinet side. Release the two screws on the control box and separate the cover and the cabinet side.
(1) (1)
(2) Remove the terminal and install (2) Remove the terminal and install the Drain Pump. Using screws, fix the d
(3) Connect the drain pump wire. (Yellow terminal.) (Float Switch is a black terminal.) (3) Connect the drain pump wire. (Yellow terminal.) (Float Switch is a black
(4) On the PCB, turn OFF the DIAL-UP SWITCH K4 corresponding to SW05 (4) On the PCB, turn OFF the
102 102
n pump(Yellow) and power supply unit(Black) to the PCB
rain hose port and the drainpipe after completing installation
** 01)_ Drain pump(MDP-E075S**3) Drain pump(MDP-E075S**3)
the Drain Pump. Using screws, fix the drain pump case.
DIAL-UP SWITCH K4 corresponding to SW05. .
Installation guide Installation guide
after completing installation
rain pump case.
terminal.)
PCB