fantastic furniture Havana Queen MK2 Manual page 13

Step 17
You will need
4 x Screws 2 x Bolts
(H2) (H10)
2 x Hexagonal 2 x Washers
Nuts (H13)
(H16)
1 x Allen Phillips Head
Key (H14)
Screwdriver
Attach the 2 x support slats (P18) to the centre rail (P9) using
2 x bolts (H10), 2 x washers (H16) and 2 x hexagonal nuts (H13), tightening with the allen key (H14).
Attach the 2 x support slats (P18) to the 2 x side rails (P7) using 4 x screws (H2), tightening
with a phillips head screwdriver. Ensure the adjusters (H12) on the support legs (P10) are
retracted so they are not touching the floor. With assistance, move the bed into its final
position. Once the bed is in it's final position extend the 3 x adjusters (H12) on the 3 x
support legs (P10) so they are level with the floor.
Step 18
You will need
22 x Screws Phillips Head
(H2) Screwdriver
Attach the 11 x slats (P17) to the 2 x side rails (P7)
using 22 x screws (H2), tightening with a phillips
head screwdriver.
fantasticfurniture.com.au
H2
H16
H2
(P7)
(P17)
H2
(P7)
H2
H10
(P18)
H10
(P9)
(P18)
H13
H16
H13
H2
H14
H10
H16
H13
H2
(P7)
Two People
Required
(P7)
Page 13