Advertisement
Quick Links
Premier Elite DT-W (GBF0007)
Press 1234 on the control panel. The below message will be displayed.
Battery
Press Yes
Press any free zone number (eg: 089) to learn your DT PIR
Note: In this case
we're learning
sensor in zone 89.
Press reset button
When it starts learning you need press the learn button and then insert the
battery into the DT PIR
Press Yes
till you reach zone type
Technical Support
:
:
91520 10269
indiatechsupport@texe.com
Advertisement
Related Manuals for Texecom Premier Elite DT-W
Summary of Contents for Texecom Premier Elite DT-W
- Page 1 Premier Elite DT-W (GBF0007) Press 1234 on the control panel. The below message will be displayed. Battery Press Yes Press any free zone number (eg: 089) to learn your DT PIR Note: In this case we’re learning sensor in zone 89.
- Page 2 Caution: Do not change the zone type & wiring type. Press Yes 7times to reach zone mode(wiring) make zone wiring as “always awake” Press Menu ( ) two times on the control panel and then press Yes to logoff from your control panel Frequently Asked Questions: 1.