Protection From Overheating - TESY WEF200SRELW TR Installation, Operation And Storage Manual

Then press the „TIME SET" button, the display is off, and
EN
the hour starts blinking
Press the „+" or „-" to adjust the hour
Continue to press the „TIME SET" button, the minute
starts blinking
Press the „+" or „-" to adjust minute.
(V) Set temperature
Then press the „TIME SET" button, and the temperature
set starts blinking. At this moment, the temperature
displayed is normally set temperature, which can be
adjusted by pressing „+" or „-"
(VI) Press „TIME SET" button to continue setting, and
press „OK" complete the setting
TIME SWITCH
„TIME ON/OFF" is to control the timed opening and
closing
Restart the machine after power is cut off, the original
setting is kept, but the current date and time must be reset.
Note: The device shows the temperature around the
location of the sensor and is not a means of accurately
measuring the ambient temperature.

PROTECTION FROM OVERHEATING

This appliance is equipped with safety thermal
disconnection device, which is actuated at high temperature
(resulting for example from blocking of the outlets for
outgoing air). For safety purposes the thermal disconnection
device will not be automatically restarted. In order for it to
be restarted, you need to take the power cord out of the
socket, wait for about 10 minutes and then put the plug in
the socket again. Normally the appliance will start operating,
but if this doesn't happen, you need to check the inlet and
outlet openings. If everything is normal with them (and the
appliance has been regularly cleaned from dust), please
contact the service center in your location.
Note: To avoid the risk of involuntary restart of
the thermal disconnection device, you should not
connect any external starting devices such as timers,
series connection switches which provide regular
switching on and off of the appliance for the sake of
convenience.
CLEANING
• It is compulsory first to switch off the appliance and
disconnect its power cord from the socket on the
wall. Before starting to clean the electric fireplace
you should wait until it cools down.
• Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
• Never immerse the appliance into water – there is
risk for your life from electric shock!
• Never use petrol, thinner or coarse abrasive
products for cleaning because they will damage the
6
Usage and Storage Instructions
surface coating of the appliance.
STORAGE
• Before putting away the electric fireplace let it cool
down after disconnecting it from the power socket.
• Use the original packing for storing the electric
fireplace if it will not be used for a certain period of
time. The product is protected from excessive dust
and dirt when it is kept in its original packing.
• Never put a hot appliance into its packing!
• The product is necessary to be stored at a dry place
away from direct sunlight.
• It is explicitly forbidden to store the appliance in
wet or damp premises.
PRODUCT PACKING SET INCLUDES:
Fireplace
Clamp for wall-mounting
Mounting screws and securing element
Remote control
Manual
Guarantee certificate
TECHNICAL CHARACTERISTICS OF THE
APPLIANCE:
Lightening – LED system (no replacement parts)
Model Rated
power
WEF200SRELW TR 2000W
Environment protection instructions
Old electric appliances contain valuable materials
and therefore should not be disposed of as domestic
waste! We ask you for your active cooperation to
protect the resources and the environment by
submitting your appliance to organized buy-back
stations (if there are such).
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
Rated voltage Rated
frequency
220-240V~ 50Hz