TESY WEF200SRELW TR Installation, Operation And Storage Manual page 4

EN
• Drill the openings for the bottom holes and fix on
the wall.
• Place the fireplace on the bearing clamp, fixed on
the wall, and turn the clamp to fix the lower part.
Use the securing screw to permanently mount
the fireplace to the wall and to protect it from
unhanging.
• Unpack the log or the pebbles from the
polyethylene bag and place them along the light-
emitting element in the configuration and position
you wish.
• Place the front glass ensuring that each pair of
grooves from both sides are properly aligned
towards to supporting axes (see Fig.4). Usually two
people can accomplish this operation.
Note: During appliance operation in areas with very
low level of background noise, it is possible specific
sound to be heard which is related to the flame effect. This
is normal and should not be considered worrying.
Thank you for choosing electric fireplace -
WEF200SRELW TR. This is a product providing heating in
winter in power ranges of 1000W or 2000W, depending
on the consumers' needs for comfortable room
temperature. If operated and taken care of properly in
4
Usage and Storage Instructions
accordance with these instructions, the appliance will
provide you with many years of useful operation.
USING THE FIREPLACE
The fireplace can be operated by the switching knobs
located in the upper right part of the appliance or by the
remote control.
LED DISPLAY
Cursor Day Timer
Heating position
Temperature and serial number display
Normally it displays the room temperature; while setting
the temperature, the temperature being set is displayed;
When setting the timer, serial number is displayed.
Time display
Normally it displays the current time; while setting the
timer, the time being set is displayed.
Timed starting and timed shutdown
It is displayed while setting the timer, and it is used in
combination with serial number setting.
E.g.,
means the startup time for setting 5 is 23:40;
means the shutdown time for setting 5 is 6:10.
Flame brightness
It displays the current brightness of the flame, which
ranges from one to five positions. This icon is not
displayed for color flame.
REMOTE CONTROLLER AND CONTROL SWITCH
Standby
Temperature/
serial number
display
Time off
Time on
Time display
Automatic
control of
heating
Flame brightness