Restart; Firmware - 2N LiftGate User Manual

Factory reset – reset the configuration default values. By confirming the factory
default reset the device restart will be forced automatically.

3.3.1 Restart

3.3.2 Firmware

3.3.3 Battery Installation
3.3.4 Log
3.3.1 Restart
The Restart tab is used for forcing the
CONFIRM RESTART – an immediate system restart is performed.
Caution
Should the main unit system be turned off (or restarted) unintentionally,
including simultaneous disconnection of external and battery supplies, e.
g., the system log will not be saved properly and this may result in a file
damage or loss.
3.3.2 Firmware
The Firmware tab is used for the
Firmware version – current firmware version.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N LiftGate restart.
®
2N LiftGate firmware administration.
64/82