Reset Button Function - 2N LiftGate User Manual

2.6 RESET Button Function

The RESET button located on the
default reset or restart of the device. Remove the main unit upper cover to get access
to the button. The button is to the right of the LTE module above the antenna
connectors.
Factory Default Reset
Press the RESET button 5 times to reset the factory defaults; the device will be
restarted after the factory reset.
Restart
Press and hold the RESET button for approx. 4 s (until all the LEDs go off and the left
LED starts shining blue). The main unit system will be restarted if powered from the
mains or turned off if a battery supply is used.
Note
The beginning of the factory default reset / restart is signaled by all the
LEDs going off and gradually by each LED going on and off separately
from left to right. After the row is completed, the left LED goes on and
off again.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Liftgate motherboard is used for factory
28/82