Firewall - 2N LiftGate User Manual

Server IP – IP address for VPN connection.
Server port – port number for VPN connection.
Protocol – select UDP or TCP (depending on the VPN server setting).
Device – select TUN or TAP (depending on the VPN server setting).
Cipher – select the type of data encoding (depending on the VPN server
setting).
The sets of certificates and keys are required files for VPN connection.
ca.crt – server certificate (obtained from the VPN server administrator).
client.crt – device certificate (generated for each
client.key – private device key (generated for each
ta.key – tls-authority key (obtained from the VPN server administrator).
SELECT FILE – for permanent storing of certificates in the device memory.
UPLOAD – upload selected files, certificates and keys to the device.

3.2.6 Firewall

The Firewall tab is used for setting access to
the firewall is inactive, there are no restrictions for the given network; if it is active,
only the accesses defined in the table below are allowed.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N LiftGate
®
2N LiftGate
®
2N LiftGate from a selected network. If
device).
device).
49/82