2.1 Before You Start
Product Completeness Check
Check before installation whether the package of the
the following:
1x
®
2N
LiftGate Main Unit
2 pcs + 2 pcs
Dowel (8 x 40 mm) with screws (4.5 x 50 mm)
1 pc
Antenna
1 pc
Battery pack
1 pc
Brief Manual
Installation Conditions
®
2N
Liftgate
is designed for vertical mounting.
®
Install
2N
LiftGate
status or display the information via the device web interface.
For the allowed range of operating temperatures refer to Section 5. Technical
Parameters .
®
2N
LiftGate
near heat sources.
®
2N
LiftGate
flowing water, condensing moisture, fog, etc.
®
2N
LiftGate
Make sure there is enough free space above and under
and flowing air to conduct heat away.
2N TELEKOMUNIKACE a.s., www.2n.cz
with respect to the signal strength – check the LED indicator
may not be operated on sites exposed to direct solar radiation or
is designed for indoor applications. It may not be exposed to rain,
may not be exposed to aggressive gas, acid vapors, solvents, etc.
®
2N
LiftGate Main Unit
®
2N
LiftGate
includes
for cabling
16/82