Related Manuals for Unfinished Furniture of Wilmington T-9B
Summary of Contents for Unfinished Furniture of Wilmington T-9B
- Page 1 : HAMPSHIRE PEDESTAL FOR SOLID TOP Item No. : T-9B AND T-142RT OR T-48RT OR T-52T (PACKED IN SEPARATE BOX) ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX) ISSUED JUN 08, 2016...
-
Page 2: Before Assembly
Protect the surface of the table with cloth if you are using any product with rubber feet or base. ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX) - Page 3 When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Pedestal column ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX) ISSUED JUN 08, 2016 - 3 -...
-
Page 4: Hardware List
Bolt Allen Key (M8x45mm) (M4x30mmx120mm) Large flat washer (2x8.5x22mm) NOTE: HARDWARE IS PACKED IN CARTON T-9B. ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX) ISSUED JUN 08, 2016 - 4 -... - Page 5 Use the Allen key (6) to loosen the bolts and washers, and then remove the plate from bottom of the table top (A) as shown below. ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX)
- Page 6 Attach the plate to bottom of the top (A) with bolts and washers (from Step 2) as shown below. Tighten with the Allen key (6). ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX)