Summary of Contents for Unfinished Furniture of Wilmington T-9B
Page 1
: HAMPSHIRE PEDESTAL FOR SOLID TOP Item No. : T-9B AND T-142RT OR T-48RT OR T-52T (PACKED IN SEPARATE BOX) ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX) ISSUED JUN 08, 2016...
Protect the surface of the table with cloth if you are using any product with rubber feet or base. ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX)
Page 3
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Pedestal column ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX) ISSUED JUN 08, 2016 - 3 -...
Bolt Allen Key (M8x45mm) (M4x30mmx120mm) Large flat washer (2x8.5x22mm) NOTE: HARDWARE IS PACKED IN CARTON T-9B. ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX) ISSUED JUN 08, 2016 - 4 -...
Page 5
Use the Allen key (6) to loosen the bolts and washers, and then remove the plate from bottom of the table top (A) as shown below. ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX)
Page 6
Attach the plate to bottom of the top (A) with bolts and washers (from Step 2) as shown below. Tighten with the Allen key (6). ITEM NO : T-9B AND T-142RT OR T-48RT OR T-52T Printed in Vietnam (PACKED IN SEPARATE BOX)