Table of Contents
Advertisement
SPECIFICATIONS
Rated voltage
Power consumption
Short operation time
TROUBLESHOOTING
Issue
The machine does not
operate
Accessory scrapes the
bowl during operation
The pot cover does not
fit the mixing bowl
properly
The machine does not
work on a certain speed
Movement when the
machine working
The release switch does
not spring back into
place after installing the
mixing bowl and pot
cover
Accessories are
misshapen or
discoloured
•
Check if the plug is in secure contact with the socket.
•
Ensure the release switch springs back into place.
•
Check if the machine has worked continuously for more
than 6 minutes and wait until the motor cools down.
•
Check if the mixing bowl is properly installed.
•
Check if the accessory installed properly on the
machine.
•
Check if the pot cover is placed on the machine properly.
•
Check if the mixing bowl is installed properly on the
machine and locked correctly.
•
Check if the mark on speed knob corresponds to the
speed silkscreen on the housing.
•
Rotate speed knob to 0 and re-check if the machine
works.
•
Check if the anti-slip feet are still attached.
•
Check if the machine is placed on a smooth and flat
tabletop.
•
Check if the pot cover is placed on the machine properly.
•
Check if the mixing bowl is properly installed.
•
The components and accessories are not suitable for
cleaning in a dishwasher. If exposed to heat or caustic
cleaners, they could become misshapen or discoloured.
•
Only clean components and accessories in soapy water.
220-240V~, 50/60Hz
1200W
6 min.
Solution
Advertisement
Table of Contents
