Switching The Monitors That Output The Hdmi Video Signals - Sony STR-DA4600ES Operating Instructions Manual

• If the TV is turned on before turning on the
receiver, the TV sound will not be output for a
moment.
Turning off the receiver with the
TV (System Power-Off)
When you turn the TV off by using the power
button on the TV's remote, the receiver and
the connected components turn off
automatically.
You can also use the multifunction remote to
turn off the TV.
TV
Press TV, then press AV ?/1.
The TV, receiver and connected components
are turned off.
Notes
• Set the TV power supply interlock function to on
before using the System Power Off function. For
details, refer to the operating instructions of the
TV.
• Depending on the status, the connected
components may not be turned off. For details,
refer to the operating instructions of the connected
components.
Enjoying movies with the
optimum sound field (Theater
Mode Sync)
Press the THEATER button on the
remote of the receiver, TV, or the
Blu-ray Disc Player, while pointing
the remote toward the TV.
The sound field switches to HD-D.C.S.
To return to the previous sound field, press the
THEATER button again.
Note
The sound field may not switch depending on the
AV ?/1
TV.
Tip
The sound field may be changed back to the
previous one when you change the TV's input.
Switching the monitors
that output the HDMI
video signals
When you have two monitors connected to the
HDMI OUT A and HDMI OUT B jacks, you
can switch the output for these two monitors
using the HDMI OUTPUT button on the
multifunction remote. This operation cannot
be performed using the simple remote.
continued
99 GB