Network Settings - Sony STR-DA4600ES Operating Instructions Manual

x OFF
Does not activate the low-pass filter.
x ON
Always activates the low-pass filter with a
cutoff frequency of 120 Hz.
Video Direct
Lets you output the video input signals from
the HDMI IN jack directly to the HDMI OUT
jack.
x OFF
The input signals from the HDMI IN jack are
output through a video processor.
x ON
The input signals from the HDMI IN jack are
output directly.
Note
Set "Video Direct" to "ON" to receive Adobe
Adobe signals.
YCC601
124
GB

Network settings

Makes the settings for the network.
Network Setup
Lets you make the network settings.
To check the network settings
1
Select "Network Setup," then press
.
2
Select "Network Information," then
press
The network setting information of the
receiver is displayed on the TV screen.
To configure network settings
automatically
or
1
RGB Select "Network Setup," then press
.
2
Select "Internet Setup," then press
3
Select "Connect Automatically
(DHCP)," then press
"Success! The receiver is now connected to
network." appears on the TV screen.
4
Press
To set the IP address manually
1
Select "Network Setup," then press
.
2
Select "Internet Setup," then press
3
Select "Manual Configuration," then
press
The setting screen for the IP address
appears on the TV screen.
4
Select the IP address, then press
The soft keyboard appears on the TV
screen.
.
.
to select "Finish."
.
.
.
.