Hdmi Settings - Sony STR-DA4600ES Operating Instructions Manual

HDMI settings

Makes the required settings for components
connected to the HDMI jacks.
Control for HDMI
Lets you turn the function which controls
components connected to the HDMI jack
using an HDMI cable on or off.
x OFF
x ON
Note
When "Control for HDMI" is set to "ON," "Audio
Out" may be changed automatically.
Pass Through
Lets you output the HDMI signals to the TV
even when the receiver is in standby mode. For
details, see "Outputting the HDMI signals
even when the receiver is in standby mode
(Pass Through)" (page 100).
x OFF
x ON
Note
When "Control for HDMI" is set to "OFF," you
cannot set "Pass Through."
Audio Out
Lets you set the HDMI audio signals output
from the playback component connected to the
receiver via an HDMI connection.
x TV+AMP
The sound is output from the TV speaker and
the speakers connected to the receiver.
Notes
• The sound quality of the playback component
depends on the TV's sound quality, such as the
number of channels, and the sampling frequency,
etc. When the TV has stereo speakers, the sound
output from the receiver is also stereo as that of the
TV, even if you play multi-channel source.
• When you connect the receiver to a video
component (projector, etc.), sound may not be
output from the receiver. In this case, select
"AMP."
• When you select the input that you have assigned
the HDMI input, sound is not output from the TV.
x AMP
The HDMI audio signals from the playback
component is only output to speakers
connected to the receiver. The multi-channel
sound can be played back as it is.
Note
Audio signals are not output from the TV speaker
when "Audio Out" is set to "AMP."
Subwoofer Level
Lets you set the level of the subwoofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each HDMI input independently.
x 0 dB
x AUTO
Automatically sets the level to 0 dB or +10 dB
depending on the audio stream.
x +10 dB
Subwoofer LPF
Lets you turn the low-pass filter for the
subwoofer output on or off. The low-pass filter
works when PCM signals are input via an
HDMI connection. Turn the function on if you
connect a subwoofer without the crossover
frequency function.
continued
123 GB