Sony STR-DA4600ES Operating Instructions Manual page 111

Position
You can register 3 patterns as Pos. 1, 2, and 3,
depending on the listening position, listening
environment, and measurement conditions.
To register settings for the
listening environment
You can select the seating position you want
and register the measurement results of the
auto calibration for that seating position.
1
Select the position (Pos. 1, 2, 3) for
which you want to register the
measurement result, then press
2
Select "Calibration Start," then press
.
3
Press V/v repeatedly and
check the items you do not want to
measure, then press b.
The confirmation screen, asking whether
you are ready to start measurement,
appears.
4
Press to select "Start."
The measurement results is registered as
the position you selected in step 1.
5
Repeat step 1 to 4 to register another
seating position.
To select the registered seating
position
Select the position (Pos. 1, 2, 3) you want,
then press .
The registered seating position is selected.
To name the Seating Position
You can rename the position name.
1
Select the the position (Pos. 1, 2, 3) you
want, then press
2
Press OPTIONS.
3
Select "Name Input," then press
.
to un-
.
.
4
Press V/v to select a character, then
press b.
You can shift input position backward and
forward by pressing B/b.
5
Repeat steps 4 to input a character one
by one, then press
The name you entered is registered.
.
111 GB