Advertisement
Gyro Calibration
3.
After pairing, pull both control sticks down and to the right for 2-3 seconds. When
you hear a beep and the lights on the drone blink rapidly for 2-3 seconds,
calibration is completed.
(Gyro calibration is recommended after pairing and if a crash occurs. Do not
attempt to do this while flying).
Drone Takeoff
4.
After pairing and calibration, press the one key take off/landing button and the
drone will fly to the height of 80cm automatically. Press the take-off/landing
button again and the drone will land automatically. After landing, wait for the
propellers to stop spinning. Turn the transmitter off before powering off the drone.
This will ensure that no signals are accidentally sent by the remote, reducing the
chance of injury. After this is done, it is safe to pick up and power off the drone.
Advertisement
