Advertisement
WARNING:
the drone will perform these manoeuvres best with a fully
charged battery.
Headless Mode
Note:
Flying in Headless Mode without sufficient experience might result in loss or damage
to the device. Do not use the Headless Mode until you totally comprehend the
instructions For Use.
1.
Place the drone in front of the pilot before pairing the drone to the transmitter.
Make sure the head of the drone faces forward and the tail faces towards the pilot.
2.
After pairing and calibration, press the Headless Mode button to enter Headless
Mode function. A beep will be heard from the transmitter and the red lights will
slowly flash, indicates that drone is in headless mode.
3.
Press the headless mode button again; you will hear a beep which indicates the
drone exits the headless mode.
4.
Under Headless Mode, the forward direction is the direction the pilot faces when
the pilot pairs the drone with the transmitter.
Advertisement
