Advertisement
If the drone keeps flying backwards when hovering, press the forward trimmer to adjust until
it gets balanced.
If the drone keeps flying forward when hovering, press the backwards trimmer to adjust until
it gets balanced.
Even after the drone is calibrated, it may show a tendency to drift while airborne. Adjusting
the trim will help counter this effect and allow better control of the drone; however, it will not
eliminate it entirely as air currents and other factors may still cause slight drift while airborne.
Altitude Hold
This drone is equipped with an Altitude Hold function to hover steadily in the air.
During the flight, the altitude hold function allows you to release the throttle joystick and
maintain its height without descending to the ground.
Advertisement
