TROUBLESHOOTING
Problem
The drone does not respond
to controls.
The drone is difficult to
control or flies erratically.
Drone drifts while in flight.
Drone suffers from
mechanical trouble.
LED lights ON but drone
does not respond to controls.
Precautions
1.
The remote-control distance will be shortened when the power of the
drone/transmitter is insufficient.
2.
When the power of the drone is insufficient, the drone would have trouble taking off
or unable to fly high.
3.
Please repair the drone in time when it is damaged. Don't fly the drone when it is
seriously damaged (rotor-wing breakage) or it might lead to injury.
4.
Please remove the batteries or avoid the damage to the product caused by
batteries leakage if you do not use the drone/transmitter for a long time.
5.
Don't crash the drone from high altitude or crash it seriously or might shorten its
lifetime.
Possible causes
•
No power to remote
or drone.
•
Poor contact
between power
plugs.
•
The drone is out of
range.
•
Gyroscopes may be
misaligned.
•
Trim not set or needs
adjustment.
•
Damage to body,
propellers or other
major components.
•
Low battery power.
Solution
•
Check remote batteries,
replace if needed.
•
Check drone battery; be
sure it is fully charged.
•
Be sure the power plugs
are firmly connected.
•
Be sure the remote has
an unobstructed line of
sight to the drone.
•
Remain within the
remote's 328ft. range.
•
Power OFF remote and
drone and reconnect
(see pg. 8).
•
Adjust trim settings (see
pg. 10).
•
Repair or replace parts
as needed.
•
Recharge the battery.