Multi Zone Settings - Sony STR-DA4400ES Operating Instructions Manual

Multi Zone settings

You can make settings for the main zone, zone
2 or zone 3.
Turning the power on or off for
zone 2/zone 3
You can turn zone 2 or zone 3 operation on or
off. "Main" (this receiver) is always selected.
You cannot turn it off.
1
Press V/v to select the zone
you want to turn on or off, then
press .
2
Press V/v to select "ON" or
"OFF," then press
x ON
x OFF
Selecting the output source for
each zone
You can select the source that is output to the
zone. Audio and video signals are output to
zone 2, while only audio signals are output to
zone 3.
1
Press V/v to select the zone to
which you want to output
audio/video signals, then press
.
2
Press B/b to select "Input," then
press .
3
Press V/v to select the input,
then press
.
.
Adjusting the volume for zone 2/
zone 3
You can adjust the volume in the main zone.
If "Sur Back Assign" is set to "ZONE2" in the
Speaker settings menu, you can also adjust the
volume of zone 2.
1
Press V/v to select the zone for
which you want to adjust the
volume, then press
2
Press B/b to select "Volume,"
then press
3
Press V/v to adjust the volume,
then press
Selecting the criteria for output
of signals to control each zone
You can turn the receiver on or off in another
zone, or select various options for use of the
12V Trigger function.
1
Press V/v to select the zone
you want, then press
2
Press B/b to select "12V
Trigger," then press
3
Press V/v to select the
parameter, then press
x OFF
Lets you turn off output of 12V triggers even
when the main receiver is turned on.
x CTRL
Lets you turn the output of 12V triggers on or
off manually using the CIS command of the IR
remote.
x ZONE
Lets you turn the output of 12V triggers on or
off based on whether the selected zone is
turned on or off.
.
.
.
.
.
.
continued
111 GB