Sony STR-DA4400ES Operating Instructions Manual page 90

Notes
• When you pull out the HDMI cable or change the
connection, perform the steps given in "When your
TV is compatible with the "Control for HDMI-
Easy Setting" function" (page 89) or "When your
TV is not compatible with the "Control for HDMI-
Easy Setting" function."
• When you assign the component video input to the
HDMI input using the Input Assign function, you
cannot set "Control for HDMI" to "ON."
• While "Control for HDMI-Easy Setting" is being
set, you cannot use functions such as One-Touch
Play or System Audio Control.
• When you set up the receiver using the "Control for
HDMI-Easy Setting" from a TV, turn on the TV,
the receiver and the playback components
beforehand.
• When you set up the receiver using the "Control for
HDMI-Easy Setting" from a TV, before you make
the "Control for HDMI-Easy Setting" function
effective, make the Control for HDMI function of
the components that are not compatible with the
"Control for HDMI-Easy Setting" function
effective.
90
GB
When your TV is not compatible
with the "Control for HDMI-Easy
Setting" function
Turn the Control for HDMI function of the
receiver and the connected component on
individually.
1
Perform the steps given in "When your
TV is compatible with the "Control for
HDMI-Easy Setting" function"
(page 89).
2
Press AMP.
The receiver can be operated using the
remote.
3
Press MENU.
The menu is displayed on the TV screen.
4
Press V/v repeatedly to select
" Settings," then press
5
Press V/v repeatedly to select "HDMI,"
or b.
then press
6
Press V/v repeatedly to select "Control
for HDMI," then press
?/1
AMP
HDMI
input
buttons
GUI
MODE
V/v/b,
MENU
or b.
or b.