Menu list (in the display window)
The following options are available in each menu.
"xx..." in the table signifies the parameter for each item.
Menu
Item
Auto Calibration AUTO CAL START?
5 4 3 2 1
MEASURING: TONE
MEASURING: T.S.P.
MEASURING: WOOFER
COMPLETE
[xxxxxxxxxx]
WARNING CODE [xxx:4x]
NO WARNING
ERROR CODE [xxx:3x]
RETRY? [xxxx]
CANCEL
CAL TYPE [xxxxxxxxx] ENGINEER, FULL FLAT,
POSITION [xxxxxxxx]
NAME IN ? [xxxxxxxx]
Level Settings
TEST TONE [xxxxxxxx]
PHASE NOISE [xxxxxxx]
PHASE AUDIO [xxxxxxx] OFF, L/C, C/R, R/SL, R/SR, SR/SL,
FRONT L [xxx.xdB]
FRONT R [xxx.xdB]
CENTER [xxx.xdB]
SURROUND L [xxx.xdB]
SURROUND R [xxx.xdB]
SUR BACK [xxx.xdB]
SUR BACK L [xxx.xdB]
SUR BACK R [xxx.xdB]
SUB WOOFER [xxx.xdB]
D. RANGE COMP. [xxx]
118
GB
Parameter
RETRY, SAVE EXIT, WRN CHECK,
PHASE INFO, DIST. INFO,
LEVEL INFO, EXIT
FL, FR, C, SLA, SRA, SLB, SRB, SBL,
SBR : 0, 1, 2, 3
F, SR, SB : 0, 1, 2, 3
YES, EXIT
FRONT REF, OFF
POS.1, POS.2, POS.3
OFF, L to SW (AUTO), L to SW (FIX) OFF
OFF, L/C, C/R, R/SL, R/SR, SR/SL,
SR/SBR, SBR/SBL, SBL/SL, SL/L,
L/SR
SR/SBR, SBR/SBL, SBL/SL, SL/L,
L/SR
–10.0dB to +10.0dB (0.5dB step)
–10.0dB to +10.0dB (0.5dB step)
–20.0dB to +10.0dB (0.5dB step)
–20.0dB to +10.0dB (0.5dB step)
–20.0dB to +10.0dB (0.5dB step)
–20.0dB to +10.0dB (0.5dB step)
–20.0dB to +10.0dB (0.5dB step)
–20.0dB to +10.0dB (0.5dB step)
–20.0dB to +10.0dB (0.5dB step)
OFF, AUTO, STD, MAX
Initial
setting
SAVE
EXIT
YES
FULL
FLAT
POS.1
OFF
OFF
0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
AUTO