Description
3.3.4
Charge post CP500 Generation 3, inside
A
B
C
D
Part
Cooling unit
DC power busbars
Cable gland plates
PE busbar
Q1 RCD
X-10 terminal block
X-20 terminal block
CAN2FIBER device
3.4
Authorization to charge
It is possible to use the EVSE with or without authorization.
An authorization can be based on RFID, a personal identification number, or a
mobile authentication method. Authorization requires a subscription to a back
office. Authorization can be a standard solution from the manufacturer, or from an
external company that offers authorization solutions via OCPP.
20
H
G
F
E
D
C
Cooling unit
DC power busbars
Cable gland plates
PE busbar
E
Q1 RCD
F
X-10 terminal block
G
X-20 terminal block
H
CAN2FIBER device
Function
To decrease the temperature of the charge cables
To connect the DC power cables
Glands for the cables to the charge post
To connect the PE wire
Residual current circuit breaker to connect or discon-
nect the AC auxiliary power to the charge post
To connect the AC auxiliary power cable
To connect the interlock and DC guard cable
To connect the optical CAN cable
A
G
B
F
9AKK107992A3070-EN | 003