ABB Terra HP Generation 3 UL User Manual page 33

Procedure
1. Determine the correct location for the sticker.
2. Remove the contamination of the sticker and adhesive. Use lint-free cloth and
non-aggressive cleaning agent.
3. Do the instructions that are on the sticker.
4. Put the sticker on the clean location.
5. Press the sticker with a spatula or a roller to the surface. Remove any air that is
trapped below the sticker.
6. Obey these instructions in the first 48 hours:
•
•
9AKK107992A3070-EN | 003
Caution: Do not cover the air vents.
Allow the adhesive of the sticker to dry.
Do not use water or cleaning agents.
Operation
33