Counting Polymer Bills - AccuBANKER AB4200 User Manual

2. Equipment Overview (continued)

2.5 Counting Polymer Bills

The default configuration of the equipment is set to count paper bills (such as
US bills). PP appears on the top right corner of the display to indicate that the
equipment is set to count paper bills. If the user needs to count polymer bills
(such as Canadian bills), this setting must be changed. Press the "5" & "8"
keys together for 3 seconds until the display changes from PP to PL
(polymer). Pressing the "5" and "8" keys again will change the setting back to
PP (paper) mode.
If PL mode has been selected, we recommended activating the DD function
(see section 2.4 above) to ensure the accuracy of the counting result. The
thickness gap may also need to be reduced (see section 3.3).
MG and LEVEL functions are not available in PL mode.
11