Operation; Counting Operation; Dual User Operation (User 1 & User 2) - AccuBANKER SWITCH AB7800 User Manual

5. Operation

5.1 Counting Operation

Once the unit has been turned on, using the power switch located in the back
of the equipment, the unit will proceed with a short self-check test. After this
self-check test has been completed, the equipment is ready to begin counting.
Select the required Currency as well as the desired operating mode (MIX-
-
SORT- FACE-ORT-DSP-COUNT)
Set up any additional options such as ADD, BATCH, etc. as needed.
-
Place the bills neatly in the hopper, and the unit will start counting them
-
automatically unless the Manual option has been selected within the
settings.
Note: Those bills considered suspicious will be rejected and sent to the
rejection tray during the counting process. Press
5.2 Dual User Operation (User 1 & User 2)
The unit can be operated by two separate users and each user can program
their settings.
Before each count, select the specific user (I or II) who will be utilizing the
equipment. The selected user will be indicated by the green light. Each user
may configure their settings. The equipment will save the settings for each
user, which allows for a faster counting process. Each user can also show or
print their counting details separately.
of a bill.
22