Bentone Biogas STG Installation And Maintenance Instruction page 7

Burner servicing schedule
Servicing must be carried out once a year or after 3 000 hours of operation.
Burner
Inspection of electrical installation
Leakage check
Filter
Electrodes
Brake disc
Motor
Fan wheel
Component replacement intervals
Control system
Valve control system
Pressure switch
Ignition system with flame guard
UV flame sensor
Gas pressure regulators
Gas valve without seal testing
Gas valve with seal testing
Gas pressure switch
Safety blow-off system
Damper motor
Contactor
The burner and its components must be recycled according to applicable regulations.
Delivery check
• Make sure everything is delivered and the goods have not been
damaged during transit.
• If something is wrong with a delivery, report it to the supplier.
• Transport damage must be reported to the shipping company.
1 year
1 year
1 year
1 year replacement at Δp>10 mbar
Replacement/Cleaning 1 year
Replacement/Cleaning 1 year
1 year
1 Year
Replacement when cleaning
needed/imbalance
10 years
10 years
10 years
10 years
10 000 hrs
15 years
10 years
Replacement upon fault detection
10 years
10 years
N/A
10 years
3 000 hrs
3 000 hrs
3 000 hrs
3 000 hrs replacement at
Δp>10 mbar
Replacement/Cleaning 3 000 hrs
Replacement/Cleaning 3 000 hrs
3 000 hrs
3 000 hrs
Replacement when cleaning
needed/imbalance
250 000 starts
250 000 starts
250 000 starts
250 000 starts
N/A
N/A
250 000 starts
N/A
250 000 starts
N/A
500 000 starts
500 000 starts
7