Starting Procedures - Badger Basket Wild Power WB26BCI Operator's Manual

STARTING PROCEDURES

Do not start the unit until it has been completely assembled. Before starting the unit, always
check the oil.
1. Inspect the device before use

DANGER OF INJURY!
Do not operate the device if you find any faults. If a part has become damaged or
defective, make sure to replace it before you use the device again.
Check the safe condition of the device:
• Check the device for leaks.
• Check the device for visual defects.
• Check that all parts of the device have been securely fitted.
• Check that all safety devices are in proper working condition.

DANGER OF INJURY!
Before starting work, always check the ground and remove all objects which could be
thrown by the device.
Once the machine has been set up properly and inspected, cold start the engine as follows:
1. Press the priming bulb 10 times.
2. Move the choke lever to the start position.
3. Hold the machine firmly on the ground with one hand. Pull the starting cord 3-5 times.
WILD BADGER POWER 11