Badger Basket Wild Power WB26BCI Operator's Manual
  1. Manuals
  2. Brands
  3. Badger Basket Manuals
  4. Trimmer
  5. WB26BCI
  6. Operator's manual

Badger Basket Wild Power WB26BCI Operator's Manual

Trimmer & brush cutter
Hide thumbs Also See for Wild Power WB26BCI:
Table of Contents

Advertisement

Quick Links

OPERATOR'S MANUAL
STRAIGHT SHAFT
TRIMMER &
BRUSH CUTTER
MODEL: WB26BCI
SAVE THESE INSTRUCTIONS
DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF
PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.
For assistance regarding the assembly, operation or maintenance of the unit, please call 1-844-786-7335
(in the United States) or contact email box CUSTOMERSERVICE@BADGERPOWERPRODUCTS.COM
Warranty service is available through an authorized service center. To locate a service center in your
area, please write us email or call the number listed above. Service on this unit, both within and after
the warranty period, should only be performed by an authorized and approved service center. When
servicing, use only identical replacement parts.
All information, illustrations, and specifications in this manual are based on the latest product
information available at the time of printing. We reserve the right to make changes at any time
without notice. The product may vary slightly from the illustrations contained in this manual.
IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions.
WILD BADGER POWER
1

Advertisement

Table of Contents
loading

Related Manuals for Badger Basket Wild Power WB26BCI

Summary of Contents for Badger Basket Wild Power WB26BCI

  • Page 1 OPERATOR’S MANUAL STRAIGHT SHAFT TRIMMER & BRUSH CUTTER MODEL: WB26BCI SAVE THESE INSTRUCTIONS DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE. For assistance regarding the assembly, operation or maintenance of the unit, please call 1-844-786-7335 (in the United States) or contact email box CUSTOMERSERVICE@BADGERPOWERPRODUCTS.COM Warranty service is available through an authorized service center.

  • Page 2: Basic Assembly

    QUICK START GUIDE BASIC ASSEMBLY For detailed assembly instruction consult the assembly section of this operators manual. 1. CONNECT SHAFTS 2. ATTACH HANDLE 3. ATTACH GUARD By removing plug & cap, Using the bolts and Using the bolts and attaching the two shafts hex wrench provided.

  • Page 3: Symbol Meaning

    SAFETY The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

  • Page 4: While Operating

    • Only use the trimming line described in the Specifications section of this manual. Never use met- al-reinforced line, wire, chain or rope. These can break off and become dangerous projectiles. • Do not replace the cutting head with rigid or metal blades. Doing so could result in serious injury. •...

  • Page 5: Other Safety Warnings

    the Idle Speed. • Adjust the handle to provide the best grip, if applicable. • Make sure the cutting head is not in contact with anything before starting the unit. • Use the unit only in daylight or good artificial light. •...
  • Page 6 SAFETY & INTERNATIONAL SYMBOLS This operator’s manual describes safety and international symbols and pictographs that may appear on this product. Read the operator’s manual for complete safety, assembly, operating and mainte- nance and repair information.  SAFETY ALERT SYMBOL: Indicates danger, warning or caution. May be used in conjunc- tion with other symbols or pictographs.

  • Page 7: Know Your Unit

    Min. 50 Min. 50 15 m 15 m HOT SURFACE WARNING: Do not touch a hot muffler or cylinder. You may get burned. These parts get extremely hot from operation. When turned off, they remain hot for a short time. SHARP BLADE WARNING: There is a sharp blade on the cutting head shield.

  • Page 8: Specifications

    SPECIFICATIONS All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. Model name ....BCI 26 Volumes of fuel tank .
  • Page 9 4. Attach/detach cutting heads: a) Remove the brush cutting blade nut and flange. Line up the holes of flange and shield, use the hex key included to prevent the shaft from turning. Turn the included socket wrench clockwise. b) Attach/detach the string trimmer head. Line up the holes of flange and shield, use the hex key included to prevent the shaft from turning.

  • Page 10: Before Operation

    BEFORE OPERATION When operating this machine, please follow the instructions for operations steps. 1. Filling with fuel  DANGER OF INJURY! FUEL IS EXPLOSIVE! Indicates danger, warning or caution. May be used in conjunction with other symbols or pictographs.  RISK OF DEVICE DAMAGE! The device is supplied without motor or gearbox oil.

  • Page 11: Starting Procedures

    STARTING PROCEDURES Do not start the unit until it has been completely assembled. Before starting the unit, always check the oil. 1. Inspect the device before use  DANGER OF INJURY! Do not operate the device if you find any faults. If a part has become damaged or defective, make sure to replace it before you use the device again.
  • Page 12 4. Pull the starting cord slowly for 10 - 15 cm until you feel some resistance, then tug it a few times until you hear the start to turn over. Move choke lever to the run position. 5. Pull the starting cord again until the engine starts. 6.

  • Page 13: Routine Maintenance

    WARNING! Always make sure your work area is clear. Loose objects and small stones may be thrown by the unit during regular use. Always maintain a minimum working area of 50 feet (15 metres) or more. WARNING! Do not use the machine for sweeping by tilting the cutting line head. This could throw loose objects and small stones 15 metres or more, causing damage or injury to people.

  • Page 14: Cleaning The Engine

    CLEANING THE ENGINE To reduce the risk of fire or overheating, periodically clean the cylinder fins and air vents with compressed air and clear the silencer area to get rid of dust, branches, leaves or other debris. GENERAL INSPECTION Periodically check that all the nuts and screws are securely tightened and the hand grips are securely fastened.

  • Page 15: Replacing The Trimmer Line

    REPLACING THE TRIMMER LINE 1. Align arrow & eyelet on the bottom of the trimming head by turning the top dial. 2. Insert the line by threading it through one eyelet and out the other eyelet on the other side of the trimming head.
  • Page 16 Long-term Storage • Remove the fuel cap, tip the unit and drain the fuel into an approved container. Reinstall the fuel cap. • Start the engine and allow it to run until it stalls. This ensures that all fuel has been drained from the carburetor.

  • Page 17: Troubleshooting

    TROUBLESHOOTING PROBLEM SOLUTION THE ENGINE WILL NOT START The fuel tank is empty Fill the fuel tank with properly-mixed fuel The priming bulb was not pressed enough Press the primer bulb 10 times or until fuel is visible The engine is flooded Squeeze the throttle control and pull the starter rope until the engine starts The fuel is old (over 30 days) and/or improperly...

  • Page 18: Manufacturer's Limited Warranty

    MANUFACTURER’S LIMITED WARRANTY The limited warranty set forth below is given by Badger with respect to new merchandise purchased and used in the United States, its possessions and territories. Badger warrants this product against defects in material and workmanship for a period of three (3) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in material or workmanship.

Table of Contents